Buckets


The CD11 comes with one bucket, and another two optional buckets. The first standard bucket is 12 inches wide and has a capacity of about 2 cubic feet. The second trenching bucket is only 6 inches wide and is ideal for installing cables or sprinkler systems. The third 20 inch wide bucket allows you to clean up and grade.


The CD21 comes with one bucket, and another two optional buckets. The first standard bucket is 13 inches wide standard (but deeper than the CD11 bucket), and has a capacity of about 2 cubic feet. The second trenching bucket is 8 inches wide and is great for digging down 7 feet to install water lines. The third 20 inch wide bucket allows you to clean up and grade.


2012 Price: $425 (Trenching Bucket)

2012 Price: $425 (Grading Bucket)

Standard Bucket Included.

Extraction Bucket
Extraction Bucket

Ripper


The ripper is attached to the bottom of the trenching bucket, and allows CanDig to dig through frozen or tough ground easier. For 2006, the ripper has been modified so that it also acts as a root cutter.


2012 Price: $295

Ripper
Ripper

Hydraulic Breaker


The hydraulic breaker (model D&A-8V) weighs 265 pounds. It comes with two bits (wedge and point). Features an impact rate of 550 - 1000 bpm and impact power of 131 ft.lb.


2012 Price: $4950

Hydraulic Breaker
Hydraulic Breaker

Thumb


The thumb is available with both the CD21 and Mining CD21. It is a mechanical thumb that can be pinned in a retracted position for storage, and will always be available for use by quickly and easily re-pinning it into its work position.


2012 Price: $795

Thumb
Thumb

Access Wheels


The CD11 has access wheels that pin onto the Mini Excavator in seconds, allowing it to become 28 inches wide. They are sturdy, steel wheels which allow you to push the Mini Excavator by hand, or use the hydraulic power to move it through those tight spots. The CD21 has a similar set of access wheels that can pin on quickly to allow the Mini Excavator to also become only 28 inches wide.


2012 Price: $195

Access Wheels
Access Wheels

Hydraulic Stabilizer Arms


The hydraulic stabilizers, along with the third and forth wheels make things easy. It also gives you spare tires for the highway.


2012 Price: $1,895

Stabilizer Arms
Stabilizer Arms

Hydraulic Auger


A 3, 6 or 8 inch auger is also available with any model, and is equipped with a torque bar for safety. It is capable of auguring 36 inches into and back out of the ground with its forward and reverse action.


2012 Price: $1,995

6 inch Hydraulic Auger
6" Hydraulic Auger

Rototiller


The Rototiller replaces the bucket and articulates back and forth like the bucket while churning weeds.


2012 Price: $1,495

Rototiller
Rototiller

Hydraulic Log Splitter


The optional Wood Splitter is capable of quartering your firewood in one pass. That means you can split your wood three times faster than with a regular hydraulic splitter!


2012 Price: $1,195

Hydraulic Log Splitter
Hydraulic Log Splitter

Spare Parts Kit


Keeps you operating and ensures even more productive use of your limited time. Also new is the heavy guage protective wrap that protects your hoses.


Included with the CD21 Mining

Spare Parts Kit
Spare Parts Kit